Help & Support / Router / Router – OpenVPN Configuration
📶 OpenVPN

Router – OpenVPN Configuration

General guidance for loading SlickVPN certificates and configs onto any OpenVPN-capable router.

Step-by-step

4 steps
1

Gather your config

Download the .ovpn file for your chosen server. Open it in a text editor to read the server address, port, cipher and embedded certificates.

2

Map the values

Every router firmware exposes the same fields under different names: remote → server address, proto → protocol, and the inline <ca>/<cert>/<key> blocks map to the CA and client certificate boxes.

3

Set the cipher

Match the cipher and auth digest from the .ovpn (commonly AES-256-CBC / SHA-256) so negotiation succeeds.

4

Apply and verify

Save, start the client, and check the router’s VPN status page or your public IP to confirm the tunnel.

← Back to all guides
SlickVPN

Privacy is Freedom. Anonymous, encrypted, unthrottled internet — on every device.

f t

Contact Information

SLICKVPN
Weston Road PMB #231
Weston, Florida 33331, USA

© SlickVPN. All Rights Reserved. Privacy is Freedom.