Help & Support / Router / Router – DD-WRT Setup
📶 OpenVPN

Router – DD-WRT Setup

Run SlickVPN on DD-WRT firmware to protect every device on your network at once.

Step-by-step

5 steps
1

Confirm firmware

Make sure your router runs a DD-WRT build with OpenVPN support (most “big” or “VPN” builds do).

2

Open the VPN tab

In the DD-WRT admin panel go to Services → VPN and enable “OpenVPN Client”.

3

Enter server details

Fill in the SlickVPN server address, port and protocol (UDP 443) from your .ovpn file.

4

Paste certificates

Copy the ca, cert, key and tls-auth blocks from your SlickVPN config into the matching CA / certificate fields.

5

Save and connect

Save, Apply Settings, then check Status → OpenVPN for “CONNECTED SUCCESS”.

← Back to all guides
SlickVPN

Privacy is Freedom. Anonymous, encrypted, unthrottled internet — on every device.

f t

Contact Information

SLICKVPN
Weston Road PMB #231
Weston, Florida 33331, USA

© SlickVPN. All Rights Reserved. Privacy is Freedom.